Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REMOVAL

for Preparation Click here




1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


2. REMOVE REAR FLOOR FINISH PLATE


    B312237
  1. Using a clip remover, remove the 3 clips.

  1. Disengage the 4 claws to remove the rear floor finish plate.



3. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/ Side Marker Light)
Click here


4. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/o Side Marker Light)


    B312226
  1. Using a clip remover, remove the 5 clips and the luggage compartment inner trim cover LH.



5. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    E356555E01
  1. Disconnect the connector.
    Text in Illustration 
    *1
    Grommet

  1. Disengage the 2 grommets and disconnect the wire harness.



    E356556
  1. Remove the 4 nuts.



    B312221
  1. Disengage the guide to remove the rear combination light assembly.