Home › Vehicle Exterior › LIGHTING (EXT) › FRONT SIDE MARKER LIGHT ASSEMBLY

FRONT SIDE MARKER LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL FRONT MARKER LIGHT BULB
  1. Install the front marker light bulb to the front marker light socket and wire.



2. INSTALL FRONT MARKER LIGHT SOCKET AND WIRE


    B312218
  1. Turn the front marker light socket and wire with the front marker light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.