Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE BACK-UP LIGHT BULB


    B312228
  1. Turn the back-up light socket and wire with the back-up light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the back-up light bulb from the rear light socket and wire.

    HINT:
    Use the same procedure for the LH side and RH side.



2. REMOVE REAR FOG LIGHT BULB (w/ Rear Fog Light)


    B312227
  1. Turn the back-up light socket and wire with the rear fog light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the rear fog light bulb from the back-up light socket and wire.



3. REMOVE BACK-UP LIGHT SOCKET AND WIRE


    B312231
  1. Disengage the 2 clamps to remove the back-up light socket and wire.