Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL BACK-UP LIGHT SOCKET AND WIRE


    B312231
  1. Engage the 2 clamps to install the back-up light socket and wire.



2. INSTALL REAR FOG LIGHT BULB (w/ Rear Fog Light)


    B314151
  1. Install the rear fog light bulb to the back-up light socket and wire.

  1. Turn the back-up light socket and wire with the rear fog light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.



3. INSTALL BACK-UP LIGHT BULB
  1. Install the back-up light bulb to the back-up light socket and wire.



    B314152
  1. Turn the back-up light socket and wire with the back-up light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.

    HINT:
    Use the same procedure for the LH side and RH side.