UPPER INSTRUMENT PANEL > DISASSEMBLY |
| 1. REMOVE NO. 2 HEATER TO REGISTER DUCT |
![]() |
Remove the 3 screws.
Disengage the claw to remove the No. 2 heater to register duct.
| 2. REMOVE NO. 1 HEATER TO REGISTER DUCT |
| 3. REMOVE DEFROSTER NOZZLE ASSEMBLY |
![]() |
Remove the 3 screws.
Disengage the 5 claws and remove the defroster nozzle assembly, No. 2 heater to register duct, and No. 1 heater to register duct as a single unit.
| 4. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.
| 5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT |
| 6. REMOVE NO. 3 DEFROSTER NOZZLE GARNISH |
![]() |
Disengage the 2 claws to remove the No. 3 defroster nozzle garnish.
| 7. REMOVE NO. 2 DEFROSTER NOZZLE GARNISH |
| 8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the 2 clips to remove the center instrument panel register assembly.
| 9. REMOVE NO. 2 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY |
![]() |
Disengage the 3 claws to remove the No. 2 instrument panel register sub-assembly.
| 10. REMOVE NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY |
| 11. REMOVE INSTRUMENT PANEL REGISTER BEZEL (for LH Side) |
![]() |
Disengage the 3 claws to remove the instrument panel register bezel.
| 12. REMOVE INSTRUMENT PANEL REGISTER BEZEL (for RH Side) |
| 13. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH |
![]() |
Disengage the 16 claws and 8 guides to remove the No. 1 defroster nozzle garnish.
| 14. REMOVE INSTRUMENT PANEL CUSHION |
![]() |
Remove the instrument panel cushion.