LOWER INSTRUMENT PANEL > REASSEMBLY |
| 1. INSTALL CLIP |
![]() |
Engage the 2 claws to install the clip.
| 2. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Align the grooves in the clip with the No. 1 power outlet socket assembly ribs, and then attach the No. 1 power outlet socket assembly as shown in the illustration.
| *a | Rib |
| *b | Groove |
| 3. INSTALL GLOVE COMPARTMENT CUSHION |
![]() |
Install the 2 glove compartment cushions.
| 4. INSTALL GLOVE COMPARTMENT DOOR REINFORCEMENT |
![]() |
Install the glove compartment door reinforcement with the screw.
| 5. INSTALL GLOVE COMPARTMENT RETAINER |
![]() |
Engage the 2 claws.
Install the glove compartment retainer with the 2 screws.