Home › Power Source / Network › POWER DISTRIBUTION › BATTERY CURRENT SENSOR

BATTERY CURRENT SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL BATTERY CURRENT SENSOR ASSEMBLY
  1. Install the battery current sensor assembly.

  1. Tighten the nut.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }

  1. Connect the engine wire with the nut.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the connector.