Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR

OCCUPANT DETECTION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)


B218574E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 3
    Front passenger seat occupied
    Below 100 Ω
    1 - 3
    Front passenger seat not occupied
    1 MΩ or higher

    If the result is not as specified, replace the separate type front seat cushion pad.
    Text in Illustration 
    *a
    Component without harness connected
    (Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))