Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER (for Sport Package)

REAR SPOILER (for Sport Package) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 REAR SPOILER BRACKET LH
  1. Install the No. 1 rear spoiler bracket LH with the 2 new bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



2. INSTALL NO. 1 REAR SPOILER BRACKET RH

HINT:
Use the same procedure described for the LH side.



3. INSTALL REAR SPOILER
  1. Engage the 2 clips to install the rear spoiler.

  1. Install 2 new bolts.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }

    NOTICE:
    Remove adhesive left in the bolt holes.

  1. Install the 6 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



4. INSTALL REAR SPOILER COVER LH
  1. Install the rear spoiler cover.



5. INSTALL REAR SPOILER COVER RH

HINT:
Use the same procedure described for the LH side.



6. INSTALL HOLE PLUG
  1. Install the hole plug.

    HINT:
    Use the same procedure described for the LH side.