Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedure listed below is for the LH side.



1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B311338
  1. Install the rear seat inner belt assembly with the bolt in the direction of the illustration.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }



2. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY
  1. Engage the hook and install the separate type rear seat cushion assembly LH.

  1. Install the bolt.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }