Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › TELLTALE LIGHT ASSEMBLY

TELLTALE LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT CLOCK ASSEMBLY


    B311342E01
  1. Apply battery voltage to the connector and check the LED illumination condition.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → 10
    Battery negative (-) → 3
    LED illuminates (AIRBAG ON)
    Battery positive (+) → 10
    Battery negative (-) → 5
    LED illuminates (AIRBAG OFF)

    Text in Illustration 
    *a
    Component without harness connected
    (Clock Assembly)
    If the result is not as specified, replace the clock assembly.