Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE

NAME PLATE > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER
(Click here)


2. REMOVE RADIATOR GRILLE EMBLEM (for Front Side)


    B314947E01
  1. Apply protective tape to the front bumper cover in the area around the radiator grille emblem.
    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    Protective Tape
    *4
    Location Pin

  1. Using an infrared light, heat the front bumper cover and the radiator grille emblem.

    Heating Temperature:
    Item
    Temperature
    Front Bumper Cover
    40 to 60°C (104 to 140°F)
    Radiator Grille Emblem
    20 to 30°C (68 to 86°F)

    CAUTION:
    Do not burn yourself with the hot front bumper cover and radiator grille emblem or with the infrared light.

    NOTICE:
    Do not heat the front bumper cover and radiator grille emblem excessively.

  1. Insert piano wire between the front bumper cover and radiator grille emblem.

    HINT:
    Be careful of the location pin positions.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the radiator grille emblem to the front bumper cover.

    NOTICE:
    Be careful not to damage the front bumper cover.

  1. Remove the 2 push nuts and the radiator grille emblem.



3. REMOVE LETTER MARK


    B453026E01
  1. Apply protective tape to the front fender in the area around the letter mark.
    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    Protective Tape

  1. Using an infrared light, heat the front fender and the letter mark.

    Heating Temperature:
    Item
    Temperature
    Front Fender
    40 to 60°C (104 to 140°F)
    Letter Mark
    20 to 30°C (68 to 86°F)

    CAUTION:
    Do not burn yourself with the hot front fender and letter mark or with the infrared light.

    NOTICE:
    Do not heat the front fender and letter mark excessively.

  1. Insert piano wire between the front fender and letter mark.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the letter mark to the front fender.

    NOTICE:
    Be careful not to damage the front fender.

  1. Remove the letter mark.



4. REMOVE RADIATOR GRILLE EMBLEM (for Rear Side)


    B314948E01
  1. Apply protective tape to the luggage compartment door panel in the area around the radiator grille emblem.
    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    Protective Tape
    *4
    Location Pin

  1. Using an infrared light, heat the luggage compartment door panel and the radiator grille emblem.

    Heating Temperature:
    Item
    Temperature
    Luggage Compartment Door Panel
    40 to 60°C (104 to 140°F)
    Radiator Grille Emblem
    20 to 30°C (68 to 86°F)

    CAUTION:
    Do not burn yourself with the hot luggage compartment door panel and radiator grille emblem or with the infrared light.

    NOTICE:
    Do not heat the luggage compartment door panel and radiator grille emblem excessively.

  1. Insert piano wire between the luggage compartment door panel and radiator grille emblem.

    HINT:
    Be careful of the location pin positions.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the radiator grille emblem to the luggage compartment door panel.

    NOTICE:
    Be careful not to damage the luggage compartment door panel.

  1. Remove the radiator grille emblem.



5. REMOVE LUGGAGE COMPARTMENT DOOR NAME PLATE


    B314950E01
  1. Apply protective tape to the luggage compartment door panel in the area around the luggage compartment door name plate.
    Text in Illustration 
    *1
    Protective Tape
    *2
    Wooden Block
    *3
    Piano Wire

  1. Using an infrared light, heat the luggage compartment door panel and the luggage compartment door name plate.

    Heating Temperature:
    Item
    Temperature
    Luggage Compartment Door Panel
    40 to 60°C (104 to 140°F)
    Luggage Compartment Door Name Plate
    20 to 30°C (68 to 86°F)

    CAUTION:
    Do not burn yourself with the hot luggage compartment door panel and luggage compartment door name plate or with the infrared light.

    NOTICE:
    Do not heat the luggage compartment door panel and luggage compartment door name plate excessively.

  1. Insert piano wire between the luggage compartment door panel and the luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the luggage compartment door name plate to the luggage compartment door panel.

    NOTICE:
    Be careful not to damage the luggage compartment door panel.

  1. Remove the luggage compartment door name plate.