Home › Engine / Hybrid System › FA20 ENGINE MECHANICAL › DRIVE BELT

DRIVE BELT > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FAN AND GENERATOR V BELT


    A058797E15
  1. Check the belt for wear, cracks or other signs of damage.
    Text in Illustration 
    *a
    INCORRECT
    If any of the following defects is found, replace the fan and generator V belt.

    1. The belt is cracked.
    2. The belt is worn out to the extent that the cords are exposed.
    3. The belt has chunks missing from the ribs.



    B000540E11
  1. Check that the belt fits properly in the ribbed grooves.
    Text in Illustration 
    *a
    CORRECT
    *b
    INCORRECT

    HINT:
    Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install the new fan and generator V belt.