COMBINATION METER > INSTALLATION |
| 1. INSTALL COMBINATION METER ASSEMBLY |
Connect the connector.
Engage the 2 clips to install the combination meter assembly.
Install the 2 screws.
| 2. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT |
Connect the connector.
Engage the 2 claws that are holding the upper instrument panel meter ornament and steering column cover together.
Engage the 2 clips and 6 claws.
| 3. INSTALL METER HOOD SUB-ASSEMBLY |
Engage the 12 claws.
Install the meter hood sub-assembly with the screw.
| 4. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel) |
Engage the 8 clips and 2 claws to install the instrument panel ornament.
| 5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel) |
Engage the 3 clips and 3 claws to install the center instrument cluster finish panel sub-assembly.
| 6. REGISTER ECU CODE (w/o Entry and Start System) |
Register the ECU code (Refer to the Service Bulletin).