Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER

COMBINATION METER > DISASSEMBLY

for Preparation Click here



1. REMOVE COMBINATION METER GLASS


    B311566
  1. Disengage the 7 claws and remove the combination meter glass.

    NOTICE:
    1. Do not touch the pointer and the dial plate when removing the combination meter glass and combination meter cover.
    2. Do not allow any dirt (fingerprints, grease, etc.) to adhere to the combination meter glass or meter display panel. If they are dirty, wipe them clean with a soft cloth.



2. REMOVE COMBINATION METER COVER


    B312947
  1. Disengage the 6 claws and remove the combination meter cover.

    NOTICE:
    Do not touch the pointer and the dial plate when removing the combination meter glass and combination meter cover.