Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER

COMBINATION METER > REASSEMBLY

for Preparation Click here



1. INSTALL COMBINATION METER COVER


    B312947
  1. Engage the 6 claws to install the combination meter cover.

    NOTICE:
    B312976
    Make sure that the meter dial plate is securely installed to the locating tabs when the combination meter cover is installed.



2. INSTALL COMBINATION METER GLASS


    B311566
  1. Engage the 7 claws to install the combination meter glass.

    NOTICE:
    Do not allow any dirt (fingerprints, grease, etc.) to adhere to the combination meter glass or meter display panel. If they are dirty, wipe them clean with a soft cloth.