Home › Audio / Visual / Telematics › AUDIO / VIDEO › QUARTER TRIM SPEAKER

QUARTER TRIM SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL REAR SPEAKER ASSEMBLY
  1. Install the rear speaker assembly with the 2 screws.

    NOTICE:
    Do not touch the speaker cone.

  1. Connect the connector.



2. INSTALL LUGGAGE COMPARTMENT TRIM COVER
  1. Engage the 8 clips install the quarter trim panel assembly LH.

  1. Install the clip.



3. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER
  1. Fold down the rear seatback assembly.

  1. Engage the 2 clips install the luggage compartment inner trim cover LH.



4. INSTALL REAR SEAT CUSHION ASSEMBLY
  1. Engage the hook and install the separate type rear seat cushion assembly LH.

  1. Install the bolt.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }



5. INSTALL FRONT DOOR SCUFF PLATE
  1. Engage the 6 claws install the front door scuff plate LH.



6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    B315249E01
  1. Align the alignment mark on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.
    Text in Illustration 
    *a
    Alignment Mark

    NOTICE:
    After installation, check that the corners fit correctly.