ROOF HEADLINING > DISASSEMBLY |
| 1. REMOVE NO. 1 ROOF WIRE (w/ Illumination) |
Remove the adhesive tape from the roof headlining assembly.

![]() | Tape | - | - |
Disengage the 2 guides and remove the No. 1 roof wire from the roof headlining assembly.
| 2. REMOVE NO. 1 ROOF WIRE (w/o Illumination) |
Remove the adhesive tape from the roof headlining assembly.

![]() | Tape | - | - |
Disengage the 2 guides and remove the No. 1 roof wire from the roof headlining assembly.
| 3. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY |
Remove the 5 adhesive tapes.
Disengage the 2 clamps and remove the No. 2 antenna cord sub-assembly from the roof headlining.

![]() | Adhesive Tape | - | - |