Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT TETHER ANCHOR

CHILD RESTRAINT SEAT TETHER ANCHOR > REMOVAL

for Preparation Click here



1. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH


    B299993
  1. Remove the bolt.

  1. Disengage the hook and remove the separate type rear seat cushion assembly LH.



2. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



3. REMOVE BENCH TYPE REAR SEATBACK ASSEMBLY


    B299994
  1. Remove the 3 clips and turn back rear seatback cover.



    B299995
  1. Remove the 2 bolts and bench type rear seatback assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



4. REMOVE FRONT DOOR SCUFF PLATE LH


    B315201
  1. Disengage the 6 claws and remove the front door scuff plate LH.



5. REMOVE FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side.



6. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover.



7. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure as for the LH side.



8. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH


    B315207
  1. Pull up the rear seatback assembly.

  1. Remove the clip.

  1. Disengage the 8 clips and remove the luggage compartment trim cover LH.



9. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

HINT:
Use the same procedure as for the LH side.



10. REMOVE QUARTER TRIM LID SUB-ASSEMBLY LH


    B315208
  1. Along the arrow in the illustration, disengage the 6 claws.



    B315209
  1. Disengage the 2 clips and 2 guides.

    HINT:
    Make the quarter trim lid sub-assembly LH hang down from the lid cover clip.



    B316678E01
  1. Push the lid cover clip knobs in the direction of the arrow to remove the 2 lid cover clips along with the quarter trim lid sub-assembly LH.
    Text in Illustration 
    *1
    Lid Cover Clip

  1. Remove the 2 lid cover clips from the lid cover LH.

    NOTICE:
    If there is any damage, be sure to replace the lid cover clip with a new one.



11. REMOVE QUARTER TRIM LID SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



12. REMOVE REAR WINDOW SIDE GARNISH LH


    B315213
  1. Remove the bolt.

  1. Disengage the 2 clips and guide remove the rear window side garnish LH.



13. REMOVE REAR WINDOW SIDE GARNISH RH

HINT:
Use the same procedure as for the LH side.



14. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY


    E247224
  1. Disconnect the connector.



    E247225
  1. Remove the 4 clips.



    E247226
  1. Disengage the 4 clips and remove the package tray trim panel assembly with the center stop light assembly.



15. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET


    B311346
  1. Remove the bolt and disengage the hook to remove the child restraint seat tether anchor bracket.

    HINT:
    Use the same procedure for the 2 child restraint seat tether anchor brackets.