Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET

CHILD RESTRAINT SEAT ANCHOR BRACKET > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT HINGE SUB-ASSEMBLY
  1. Install the rear seat hinge sub-assembly with the 3 bolts.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }



2. INSTALL LUGGAGE COMPARTMENT TRIM COVER
  1. Engage the 8 clips install the quarter trim panel assembly LH.

  1. Install the clip.



3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    B315249E01
  1. Align the alignment mark on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.
    Text in Illustration 
    *a
    Alignment Mark

    NOTICE:
    After installation, check that the corners fit correctly.



4. INSTALL FRONT DOOR SCUFF PLATE
  1. Engage the 6 claws install the front door scuff plate LH.



5. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY
  1. Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }



6. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY
  1. Install the 2 bolts and bench type rear seatback assembly.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }

  1. Install the 3 clips and rear seatback cover.



7. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY
  1. Engage the hook and install the separate type rear seat cushion assembly LH.

  1. Install the bolt.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }