Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET

CHILD RESTRAINT SEAT ANCHOR BRACKET > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY


    B299993
  1. Remove the bolt.

  1. Disengage the hook and remove the separate type rear seat cushion assembly LH.



2. REMOVE BENCH TYPE REAR SEATBACK ASSEMBLY


    B299994
  1. Remove the 3 clips and turn back rear seatback cover.



    B299995
  1. Remove the 2 bolts and bench type rear seatback assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



3. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY


    B311348
  1. Remove the 2 bolts and child restraint seat anchor bracket sub-assembly.



4. REMOVE FRONT DOOR SCUFF PLATE


    B315201
  1. Disengage the 6 claws and remove the front door scuff plate LH.



5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

HINT:
Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover.



6. REMOVE LUGGAGE COMPARTMENT TRIM COVER


    B315207
  1. Pull up the rear seatback assembly.

  1. Remove the clip.

  1. Disengage the 8 clips and remove the luggage compartment trim cover LH.



7. REMOVE REAR SEAT HINGE SUB-ASSEMBLY


    B311349
  1. Remove the 3 bolts and rear seat hinge sub-assembly.