Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    B299967E01
  1. Install the front seat inner belt assembly with the nut and washer.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.

    Text in Illustration 
    *1
    Protruding Part

  1. Engage the claw and each clamp.

  1. Connect the rubber band of the separate type front seatback cover.



2. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
  1. Engage the 2 claws and 4 guides to install the front seat inner cushion shield.



3. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    B311399E01
  1. Install the front seat inner belt assembly with the nut and washer.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.

    Text in Illustration 
    *1
    Protruding Part

  1. Engage the claw and each clamp.

  1. Connect the occupant classification sensor connector.



4. INSTALL FRONT SEAT ASSEMBLY
(Click here)