Home › Engine / Hybrid System › FA20 FUEL › FUEL PUMP (for High Pressure)

FUEL PUMP (for High Pressure) > INSPECTION

for Preparation Click here



1. INSPECT FUEL PUMP ASSEMBLY


    A085038E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    0.45 to 0.55 Ω

    Text in Illustration  
    *a
    Component without harness connected
    (Fuel Pump Assembly)
    If the result is not as specified, replace the fuel pump assembly.