REAR SHOCK ABSORBER > DISASSEMBLY |
| 1. REMOVE REAR SUPPORT TO REAR SHOCK ABSORBER NUT LH |
![]() |
Secure the SST in a vise.
![]() |
Set the arm hooks of SST on the middle line on the spring outer circumference.
Using SST, compress the rear coil spring LH.
![]() |
After the rear coil spring LH becomes free of load, install SST to the rear support to rear shock absorber nut LH. And then, using a long socket hexagon 5 mm, hold the piston rod of the rear shock absorber assembly and remove the rear support to rear shock absorber nut LH.
| 2. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY LH |
Remove the rear suspension support assembly LH from rear shock absorber assembly LH.
| 3. REMOVE REAR UPPER SPRING SEAT LH |
Remove the rear upper spring seat LH from the rear suspension support assembly LH.
| 4. REMOVE REAR COIL SPRING LH |
Remove the rear coil spring from the rear shock absorber assembly LH. Release the SST and remove the rear coil spring.
| 5. REMOVE REAR NO. 1 SHOCK ABSORBER DUST COVER LH |
Remove the rear No. 1 shock absorber dust cover LH form the rear shock absorber assembly LH.
| 6. REMOVE REAR NO. 1 SPRING BUMPER LH |
Remove the rear No. 1 spring bumper LH from the rear shock absorber assembly LH.