Home › Engine / Hybrid System › FA20 LUBRICATION › OIL PUMP

OIL PUMP > DISASSEMBLY

for Preparation Click here



1. REMOVE OIL FILTER SUB-ASSEMBLY


A276044
  1. Remove any foreign matter and clean the installation surface of the engine.

  1. Using SST, remove the oil filter sub-assembly.

    SST
    09228-22020  



2. REMOVE OIL FILTER UNION


    A276915
  1. Remove the oil filter union.



3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    A276917E01
  1. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
    Text in Illustration 
    *1
    24 mm Deep Socket Wrench



4. REMOVE ENGINE OIL TEMPERATURE SENSOR


    A276075E01
  1. Using a 19 mm deep socket wrench, remove the engine oil temperature sensor.
    Text in Illustration 
    *1
    19 mm Deep Socket Wrench



5. REMOVE VVT SENSOR (for Intake Side of Bank 1)


A280840
  1. Remove the bolt and VVT sensor.

  1. Remove the O-ring from the VVT sensor.



6. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


A280841
  1. Remove the bolt and VVT sensor.

  1. Remove the O-ring from the VVT sensor.



7. REMOVE VVT SENSOR (for Intake Side of Bank 2)


A280842
  1. Remove the bolt and VVT sensor.

  1. Remove the O-ring from the VVT sensor.



8. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


A280843
  1. Remove the bolt and VVT sensor.

  1. Remove the O-ring from the VVT sensor.



9. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 1)


    A280844
  1. Remove the 2 bolts and camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.



10. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 1)


    A280845
  1. Remove the 2 bolts and camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.



11. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)


    A280846
  1. Remove the 2 bolts and camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.



12. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)


    A280847
  1. Remove the 2 bolts and camshaft timing oil control valve.



    A276534E01
  1. Remove the O-ring from the camshaft timing oil control valve.
    Text in Illustration 
    *1
    O-ring
    *2
    Back-up Ring

  1. Remove the back-up ring from the camshaft timing oil control valve.