Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System) > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
  1. Customizing with the GTS

    NOTICE:
    1. When the customer requests a change in a function, first make sure that the function can be customized.
    2. Record the current settings before customizing.
    3. When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT:
    The following items can be customized.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Wireless Door Lock or Warning.

    5. Select the setting by referring to the table below.

      Wireless Door Lock 
      Display
      Default
      Function
      Setting
      Relevant ECU
      Wireless Control
      ON
      Function that turns wireless door lock function / OFF or ON
      OFF or ON
      Main body ECU (network gateway ECU)
      Wireless Buzzer Resp*1
      ON
      Wireless door lock buzzer response
      OFF or ON
      Main body ECU (network gateway ECU)
      Hazard Answer Back
      ON
      When wireless lock switch on transmitter pressed, illuminate all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice
      OFF or ON
      Main body ECU (network gateway ECU)
      Open Door Warning*2
      ON
      The buzzer sounds when lock is pressed when any of the doors are ajar.
      OFF or ON
      Main body ECU (network gateway ECU)
      Unlock 2 Operation*3, *4
      ON
      Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.
      OFF or ON
      Main body ECU (network gateway ECU)
      Panic Function*3
      ON
      Function to operate theft deterrent system by continuously pressing panic switch on door control transmitter module set sub-assembly for 1.5 seconds
      OFF or ON
      Main body ECU (network gateway ECU)
      Wireless Auto Lock
      ON
      This function turns the wireless auto lock function on or off.
      OFF or ON
      Main body ECU (network gateway ECU)
      Auto Lock Time
      30 s
      Time until relocking after unlocking with wireless door lock function
      30 s, 60 s or 120 s
      Main body ECU (network gateway ECU)
      Trunk Lid Operation
      Long1
      Function to change the operation method of opening the luggage compartment door by the door control transmitter module set sub-assembly.
      1tim ON, 2tim ON, Long1 or Long2
      Main body ECU (network gateway ECU)
      Wireless Buzzer Vol*1
      Level 5
      Wireless door lock buzzer volume
      Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level 0
      Main body ECU (network gateway ECU)

      1. *1: w/ Wireless Door Lock Buzzer Answer-back Function
      2. *2: w/ Door Ajar Warning Function
      3. *3: w/ Panic Alarm Control Function
      4. *4: w/ Double Locking System

      Others 
      Display
      Default
      Function
      Setting
      Relevant ECU
      Detection of Vehicle*
      ON
      This function turns the detection of vehicle function OFF or ON.
      OFF or ON
      Main body ECU (network gateway ECU)
      1. *: w/ Vehicle Position Sensing Function