Home › Vehicle Interior › DOOR LOCK › KEY REMINDER WARNING SYSTEM (w/o Entry and Start System)

KEY REMINDER WARNING SYSTEM (w/o Entry and Start System) > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE KEY REMINDER WARNING SYSTEM (w/o Entry and Start System)
  1. Customizing with the GTS

    NOTICE:
    1. When the customer requests a change in a function, first make sure that the function can be customized.
    2. Record the current settings before customizing.
    3. When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT:
    The following items can be customized.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.

    5. Select the setting by referring to the table below.

      Warning 
      Display
      Default
      Function
      Setting
      Relevant ECU
      Key Remind Sound
      Normal
      Function to change cycle of the key reminder warning buzzer.
      Normal, Slow or Fast
      Combination meter assembly