Home
›
Vehicle Exterior
›
EXTERIOR PANELS / TRIM
›
REAR BUMPER
REAR BUMPER > REASSEMBLY > Preparation
EQUIPMENT
Protective tape
Heat light
Piano wire
Wooden block or similar object
For tying both piano wire ends
Cutter or other similar tool
Torque wrench
Double-sided tape
Adhesive
3M DP-105 or equivalent
Infrared light
Non-residue solvent
LUBRICANT
Primer
-
Adhesive (Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent)
-
RECOMMENDED TOOLS
09061-1C100
Clip Remover
6mm
-
09061-1C300
Set, Moulding Remover
-
(09061-1C320)
Remover B, Moulding
-