Home › Vehicle Exterior › BODY DIMENSIONS › REAR DOOR
BM19Y0E _01 Vehicle Exterior _060206 BODY DIMENSIONS _0295183 REAR DOOR F

BODY DIMENSIONS  REAR DOOR  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Use specification *1 when performing centering measurements for the body dimensions.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Roof Side Rail Assembly Mark -
B, b Rear Door Hinge Installation Nut M8 (0.31)
C, c Rear Door Hinge Installation Nut M8 (0.31)
D, d Center Body Pillar Assembly Mark -
E, e Center Body Pillar Assembly Mark -
F, f Rocker Panel Assembly Mark -
G, g Roof Side Rail Assembly Mark -
H, h Quarter Panel Assembly Mark -
J, j Quarter Panel Assembly Mark -
K, k Rear Door Lock Striker Installation Nut M8 (0.31)
L, l Front Floor Crossmember Standard Hole φ15 (0.59)
*1 Airbag ECU Unit Bracket Installation Hole φ9 (0.35)

K136996E01
1.615,6.583 5.573,6.927 3.958,0.344 10 false Distance between points other than those above 0.229,8.292 0.5,8.865 0.271,0.573 10 false mm (in.)

K136997E01
0.813,7.573 4.781,7.938 3.969,0.365 10 false Distance between points other than those above 0.26,8.302 0.521,8.865 0.26,0.563 10 false mm (in.)