Home › Vehicle Exterior › BODY WELD POINT › QUARTER PANEL EXTENSION
BM19Y0E _01 Vehicle Exterior _060208 BODY WELD POINT _0295216 QUARTER PANEL EXTENSION F

BODY WELD POINT  QUARTER PANEL EXTENSION  CUT AND JOIN REPLACEMENT SECTIONS  


K102434

With the back door opening trough removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location


K137077E01
2.771,3.313 3.458,3.771 0.688,0.458 10 false 140 (5.51) 0.292,8.458 0.906,8.865 0.615,0.406 10 false mm (in.)

INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K137078E01
2.667,6.333 2.5,6.333 2.5,6.333 3.24,4.396 false 2.781,6.25 5.333,6.698 2.552,0.448 10 false QUARTER PANEL EXTENSION UPPER