Home › Vehicle Exterior › BODY WELD POINT › REAR FLOOR SIDE MEMBER
BM19Y0E _01 Vehicle Exterior _060208 BODY WELD POINT _0295224 REAR FLOOR SIDE MEMBER F

BODY WELD POINT  REAR FLOOR SIDE MEMBER  CUT AND JOIN REPLACEMENT SECTIONS  


K102443

With the rear floor rear inner crossmember removed.


REMOVAL


Symbol Meaning
K108820

Remove Weld Points
K108827

Cut and Join Location


K137104E01
4.771,7.563 5.448,8.073 0.677,0.51 10 false 210 (8.27) 0.302,8.427 0.99,8.865 0.688,0.438 10 false mm (in.)

INSTALLATION


Symbol Meaning
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

After welding, apply undercoating to the corresponding parts. (See the painting / coating)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K137105E01
1.5,4.167 1.333,4.167 1.333,4.167 1.49,3.365 false 1.604,4.073 5.188,4.542 3.583,0.469 10 false REAR FLOOR SIDE MEMBER SUB-ASSEMBLY FRONT