Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL SEALING
BM19Y0E _01 Vehicle Exterior _060207 PAINTING / COATING _0295192 BODY PANEL SEALING F

PAINTING / COATING  BODY PANEL SEALING  APPLICATION AREAS  


1.

Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part) ,etc., to waterproof and rustproof them.

HINT:
·

Apply degreasing agent to a clean cloth and clean the sealer application areas.

·

After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.

·

If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.




K110022

Flat Finishing
K110023

No Flat Finishing

K137112

K137113E01
0.667,6.333 2.135,6.573 1.469,0.24 12 false RH Side: 4.167,6.333 5.635,6.573 1.469,0.24 12 false LH Side:

K137114E01
3.635,4.885 4.323,5.417 0.688,0.531 12 false for LHD: 0.188,5.865 0.875,6.396 0.688,0.531 12 false for RHD:

K137115E01
3.333,6.417 3.885,6.656 0.552,0.24 12 false LH: 5.333,6.427 5.885,6.667 0.552,0.24 12 false RH:

K137116

K137117