REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
*1: Bolts.
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
*1: Bolts.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
Measure the dimensions before installing the headlights.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| *a | 1323 mm (52.09 in.) | *b | 1014 mm (39.92 in.) |
| *c | 676 mm (26.61 in.) | *d | 648 mm (25.51 in.) |