With the radiator support removed. (Engine installed)
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Cut and Join Location |
Carefully cut the front side member sub-assembly so not to damage *1.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| *a | 131 mm (5.16 in.) | *b | 116 mm (4.57 in.) |
| *c | 273 mm (10.75 in.) | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Spot Weld |
|
Plug Weld |
|
Butt Weld |
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.