Home › Vehicle Exterior › BODY WELD POINT › REAR FLOOR REAR CROSS OUTER PANEL
BM19Y0E _01 Vehicle Exterior _060208 BODY WELD POINT _0295417 REAR FLOOR REAR CROSS OUTER PANEL F

BODY WELD POINT  REAR FLOOR REAR CROSS OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K102436

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location


K137081E01
2.125,3.594 2.802,4.073 0.677,0.479 10 false 145 (5.71) 4.438,3.594 5.115,4.073 0.677,0.479 10 false 145 (5.71) 0.344,8.385 1.021,8.865 0.677,0.479 10 false mm (in.)

INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K137082E01
3.427,2.792 2.917,0.833 2.917,0.833 3.083,0.833 false 3.177,0.74 5.979,1.26 2.802,0.521 10 false BODY LOWER BACK PANEL OUTER NO.2