Home › Vehicle Exterior › BODY WELD POINT › REAR FLOOR REAR CROSS OUTER PANEL
BM19Y0E _01 Vehicle Exterior _060208 BODY WELD POINT _0295417 REAR FLOOR REAR CROSS OUTER PANEL F

BODY WELD POINT  REAR FLOOR REAR CROSS OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)  


K102437

With the back door opening trough removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

K137083E01
4.438,2.885 5.146,3.406 0.708,0.521 10 false 145 (5.71) 0.708,3.573 1.26,3.813 0.552,0.24 12 false LH: 2.292,3.563 2.844,3.802 0.552,0.24 12 false RH: 0.333,8.417 0.917,8.865 0.583,0.448 10 false mm (in.)


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K137084E01
3.427,2.073 2.833,0.25 2.833,0.25 3,0.25 false 3.094,0.156 5.969,0.604 2.875,0.448 10 false BODY LOWER BACK PANEL OUTER NO.2 0.708,3.573 1.26,3.813 0.552,0.24 12 false LH: 2.281,3.573 2.833,3.813 0.552,0.24 12 false RH: