Home › Vehicle Exterior › BODY WELD POINT › REAR FLOOR REAR INNER CROSSMEMBER
BM19Y0E _01 Vehicle Exterior _060208 BODY WELD POINT _0295418 REAR FLOOR REAR INNER CROSSMEMBER F

BODY WELD POINT  REAR FLOOR REAR INNER CROSSMEMBER  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K102438

With the rear floor rear cross outer panel removed.


REMOVAL


Symbol Meaning
K108820

Remove Weld Points
K108827

Cut and Join Location

K137085E01
2.542,3.594 3.177,4.104 0.635,0.51 10 false 75 (2.95) 4.094,3.594 4.729,4.104 0.635,0.51 10 false 75 (2.95) 0.333,8.438 0.938,8.865 0.604,0.427 10 false mm (in.) 2.646,8.073 3.281,8.583 0.635,0.51 10 false 50 (1.97) 4.021,8.073 4.656,8.583 0.635,0.51 10 false 50 (1.97)


INSTALLATION


Symbol Meaning
K108825

Plug Weld
K108831

Butt Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K137086E01
3.438,2.688 2.917,0.833 2.917,0.833 3.083,0.833 false 3.188,0.74 6.708,1.229 3.521,0.49 10 false BODY LOWER BACK PANEL SUB-ASSEMBLY INNER