Home › General › INTRODUCTION › WHEN REMOVING,INSTALLING OR REPLACING PARTS › 2015.08–2016.09
BM19Y0E _V1 General _060205 INTRODUCTION _0295247 WHEN REMOVING,INSTALLING OR REPLACING PARTS F

INTRODUCTION  WHEN REMOVING,INSTALLING OR REPLACING PARTS  PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED  


Refer to the TOYOTA Repair Manual for each work procedure.

PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED


Procedures Necessary when ECU or Other Parts are Replaced
Replacement Part Necessary Procedure Effect or Inoperative Function when Necessary Procedure is not Performed Note
·

Automatic transmission assembly

·

Valve body assembly

·

Any of the shift solenoid valve

·

Engine assembly

·

ECM


Reset memory Large shift shock -
w/ Engine Immobiliser System
·

ECM

·

Transponder key ECU assembly

·

Key


ECU communication ID registration
(Engine Immobiliser System)
Engine start Refer to Service Bulletin
Code registration
(Engine Immobiliser System)
w/ Wireless Door Lock Control System
·

Door control transmitter

·

Main body ECU (Fuse block assembly)


Code registration
(Wireless door lock control system)
Wireless door lock control system Refer to Service Bulletin
·

Front door window regulator assembly RH*1

·

Front door window regulator assembly LH*2

·

Power window regulator motor assembly RH*1

·

Power window regulator motor assembly LH*2

·

Power window regulator master switch assembly


Initialize power window control system
·

Auto up and down function

·

Jam protection function

·

Key-off operation function


-

*1: for RHD

*2: for LHD