CONSTRUCTION
The sensors are installed to the exhaust manifold and front exhaust pipe* and detect the oxygen concentration in the exhaust emission by the amount of the electromotive force generated within the sensors.
*: Models for Thailand and Mexico
The lower the oxygen concentration, the greater the electromotive force gets, indicating that the air-to-fuel ratio is rich (rich condition).
Based on this voltage, the engine control computer judges whether the current air-to-fuel ratio is greater or smaller than the stoichiometric ratio.
The sensor begins operating at about 300°C or more. In order to activate the sensor sooner, a heater circuit is provided.
This helps improve accuracy of the air-to-fuel ratio feedback control, thus reducing the exhaust emission.
| *a | Atmosphere | *b | Heater |
| *c | Platinum Electrode | *d | Sensor Element (Zirconia) |