CONSTRUCTION
The angle of the intake and exhaust valves is narrowed and set at 29.7° to realize a compact cylinder head.
The cylinder head bolt employs plastic region tightening bolts.
The injectors are installed in the cylinder head to reduce the distance from injector to intake valve, thus it prevents the fuel from adhering to the intake port walls, and reduce exhaust emissions.
The routing of the water jacket in the cylinder head is optimized to achieve high cooling performance.
| *1 | Fuel Injector Assembly | *2 | Intake Port |
| *3 | Water Jacket | - | - |
| *a | 29.7° | *b | Intake Side |
| *c | Exhaust Side | - | - |