Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003175 K3-VE ENGINE MECHANICAL _0016000 ENGINE UNIT DE DETAILS F

K3-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD GASKET  


CONSTRUCTION


a.

A single-layer metal type cylinder head gasket is used.


b.

A shim the width of the seal is laser-welded to the cylinder bore surrounding to provide stable surface pressure and improve seal efficiency and durability.

W103598C04
4.854,1.448 4.75,1.667 4.75,1.667 4.667,1.667 false 4.125,0.521 4.615,1.01 0.49,0.49 10 *a 4.469,1.563 4.875,1.99 0.406,0.427 10 *1 2.844,1.198 3.24,1.604 0.396,0.406 10 A 3.375,1.198 3.75,1.583 0.375,0.385 10 A
*1 Shim - -
*a A - A Cross Section - -