Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003175 K3-VE ENGINE MECHANICAL _0016000 ENGINE UNIT DE DETAILS F

K3-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CRANKSHAFT BEARING  


CONSTRUCTION


a.

The upper main bearing has an oil groove around its inside circumference.

W103583C04
4.26,0.813 4.583,0.417 4.583,0.417 4.802,0.417 true 4.344,1.99 4.667,2.396 4.667,2.396 4.885,2.396 true 3.385,0.927 3.083,0.51 3.083,0.51 2.865,0.51 true 4.875,0.344 5.271,0.771 0.396,0.427 10 *1 4.99,2.302 5.438,2.781 0.448,0.479 10 *2 2.646,0.427 3.063,0.896 0.417,0.469 10 *a
*1 Crankshaft Bearing (Upper) *2 Crankshaft Bearing (Lower)
*a Oil Groove - -