Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003175 K3-VE ENGINE MECHANICAL _0016000 ENGINE UNIT DE DETAILS F

K3-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

Each cylinder has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased by means of the large total port areas.


b.

The valves are directly opened and closed by 2 camshafts.


c.

The VVT-i system is used to achieve low fuel consumption, high engine performance and reduce exhaust emissions.


d.

The intake camshaft and exhaust camshaft are driven by a timing chain.


e.

This engine uses the Variable Valve Timing-intelligent (VVT-i) system which controls the intake camshaft to provide optimal valve timing according to driving conditions. With this, lower fuel consumption, higher engine performance, and exhaust emission have been reduced.

W105198C02
1.563,0.865 2.021,0.865 2.021,0.865 2.354,1.198 true 5.688,0.344 5.229,0.344 5.229,0.344 4.896,0.677 true 5.979,1.417 5.521,1.417 5.521,1.417 5.188,1.083 true 1.573,2.781 2.573,2.781 2.573,2.781 2.885,2.448 true 4.25,4.313 3.781,4.313 3.781,4.313 3.458,3.979 true 6,1.938 5.333,1.938 5.333,1.938 5,1.615 true 6.021,2.375 5.073,2.375 5.073,2.375 4.635,1.583 true 2.49,2.052 1.583,2.052 true 1.344,0.792 1.781,1.25 0.438,0.458 10 *1 5.76,0.26 6.146,0.615 0.385,0.354 10 *4 6.052,1.323 6.448,1.708 0.396,0.385 10 *5 1.354,2.688 1.802,3.177 0.448,0.49 10 *3 1.365,1.948 1.844,2.448 0.479,0.5 10 *2 4.333,4.219 4.75,4.635 0.417,0.417 10 *8 6.063,1.875 6.479,2.26 0.417,0.385 10 *6 6.115,2.302 6.51,2.698 0.396,0.396 10 *7
*1 Camshaft Timing Sprocket Assembly
(VVT-i Controller)
*2 Chain Tensioner Plunger
*3 Timing Chain Tension Arm *4 Camshaft (Intake Camshaft)
*5 No.2 Camshaft (Exhaust Camshaft) *6 Exhaust Valve
*7 Intake Valve *8 Chain Sub-assembly