Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003175 K3-VE ENGINE MECHANICAL _0016000 ENGINE UNIT DE DETAILS F

K3-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  INTAKE AND EXHAUST VALVE AND VALVE LIFTER  


CONSTRUCTION


a.

Narrower valve stems are used to reduce the intake and exhaust resistance and to reduce weight.


b.

The same valve springs are used for both the intake and exhaust valves. They are variable pitch springs that offer good valve following performance.


c.

Valve lifters with shimless valve adjustment are used for weight reduction.

W103584C03
3.427,1 2.865,0.802 2.865,0.802 2.771,0.802 false 3.448,1.625 2.865,1.406 2.865,1.406 2.771,1.406 true 3.542,2.188 2.865,1.938 2.865,1.938 2.771,1.938 true 3.667,3.313 2.865,3.031 2.865,3.031 2.771,3.031 false 4.552,1.406 5.063,1.969 0.51,0.563 10 *a 2.573,0.719 3.219,1.219 0.646,0.5 10 *1 2.573,1.323 2.969,1.719 0.396,0.396 10 *2 2.573,1.865 3.052,2.333 0.479,0.469 10 *3 2.583,2.958 3.031,3.438 0.448,0.479 10 *4
*1 Cam *2 Valve Lifter
*3 Compression Spring *4 Valve
*a Lifter Thickness - -


NOTICE:

The adjustment of the valve clearance is accomplished by selecting and replacing the appropriate valve lifters. Adjusting valve lifters are available in 29 increments of 0.02 mm (0.0008 in.), from 5.12 mm (0.202 in.) to 5.68 mm (0.224 in.).