Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003175 K3-VE ENGINE MECHANICAL _0016000 ENGINE UNIT DE DETAILS F

K3-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CAMSHAFT  


CONSTRUCTION


a.

An oil passage is provided in the intake camshaft in order to supply engine oil pressure to the VVT-i system.


b.

A camshaft timing sprocket assembly is installed on the front of the intake camshaft to vary the timing of the intake valves.


c.

A timing rotor for the camshaft position sensor is provided at the back end of the intake camshaft.

W105187C02
1.594,0.844 1.802,0.844 1.802,0.844 2.135,1.406 true 2.438,1.448 2.625,0.844 2.625,0.844 2.771,0.844 true 0.698,2.24 0.896,2.24 0.896,2.24 1.292,2.906 true 5.417,2.083 5.594,1.563 5.594,1.563 5.75,1.563 true 4.646,2.302 4.896,1.542 4.896,1.542 5.052,1.542 true 5.74,3.083 5.917,3.615 5.917,3.615 6.063,3.615 true 3.417,4.042 3.24,4.563 3.24,4.563 3.083,4.563 true 1.417,0.729 1.823,1.135 0.406,0.406 10 *a 2.844,0.771 3.26,1.146 0.417,0.375 10 *b 0.49,2.156 0.979,2.5 0.49,0.344 10 *1 5.813,1.49 6.385,2.146 0.573,0.656 10 *3 5.135,1.469 5.542,1.844 0.406,0.375 10 *2 6.146,3.521 6.552,3.885 0.406,0.365 10 *5 2.906,4.49 3.333,4.781 0.427,0.292 10 *4
*1 Camshaft Timing Sprocket Assembly
(VVT-i Controller)
*2 Camshaft (Intake Camshaft)
*3 Timing Rotor *4 Camshaft Timing Gear or Sprocket
*5 No.2 Camshaft (Exhaust Camshaft) - -
*a Oil Passage (Advance) *b Oil Passage (Retard)