OUTLINE
The 3SZ-VE engine is a 1.5-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.
This engine uses the Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System. These systems achieve improved engine performance, fuel economy and clean emissions.
SPECIFICATION
| Item | Specification | ||
|---|---|---|---|
| Engine Type | 3SZ-VE | ||
| No. of Cyls. and Arrangement | 4-cylinder, In-line | ||
| Valve Mechanism | 16-valve DOHC, Chain Drive (with VVT-i) | ||
| Combustion Chamber | Pentroof Type | ||
| Flow of Intake and Exhaust Gasses | Cross-Flow | ||
| Fuel System | SFI | ||
| Ignition System | DIS | ||
| Displacement | 1495 cm3 (91.2 cu. in.) | ||
| Bore x Stroke | 72.0 mm X 91.8 mm (2.83 in. X 3.61 in.) | ||
| Compression Ratio | 10.0 : 1 | ||
| Max. Output [EEC] | 76 kW @ 6000 rpm
74 kW @ 6000 rpm*1 |
||
| Max. Torque [EEC] | 136 N*m @ 4400 rpm
133 N*m @ 4400 rpm*1 |
||
| Valve Timing | Intake | Open | 32°BTDC to 10°ATDC |
| Closed | 18°ABDC to 60°ABDC | ||
| Exhaust | Open | 30°BBDC | |
| Closed | 2°ATDC | ||
| Firing Order | 1 - 3 - 4 - 2 | ||
| Fuel | Unleaded Gasoline
E20 fuel*2 |
||
| Research Octane Number (RON) | 90 or higher | ||
| Oil Grade | API grade SL , SM or ILSAC Multigrade Engine Oil | ||
| Emission Regulation | EURO 2
EURO 4*1 |
||
| Engine Service Mass*3 (Reference) | 105 kg (231 lb) | ||
*1: Models for Thailand and Mexico
*2: Models for Thailand
*3: Weight shows the figure with oil and water fully filled.
MAIN FEATURES
The 3SZ-VE engine has achieved the following performance through the adoption of the items listed below.
High performance and reliability
Low noise and vibration
Lightweight and compact design
Good serviceability
Clean emission and fuel economy
| Item | (1) | (2) | (3) | (4) | (5) | |
|---|---|---|---|---|---|---|
| Engine Proper | A precision cast-iron cylinder block is used. | ○ | - | - | - | - |
| An offset crankshaft is used. | ○ | ○ | - | - | ○ | |
| An aluminum oil pan sub-assembly is used. | - | - | ○ | - | - | |
| Low-tension piston rings are used. | ○ | - | - | - | ○ | |
| Valve Mechanism | A timing chain and chain tensioner are used. | - | ○ | - | ○ | - |
| The Variable Valve Timing-intelligent (VVT-i) system is used. | ○ | - | - | - | ○ | |
| A shimless type valve lifters are used. | - | - | ○ | - | - | |
| Cooling System | Toyota Genuine Super Long Life Coolant (SLLC) is used. | - | - | - | ○ | - |
| Intake and Exhaust System | A plastic intake manifold is used. | - | - | ○ | - | - |
| A stainless steel exhaust manifold is used. | - | - | ○ | - | - | |
| Three-Way Catalytic converter (TWC) is used. | - | - | - | - | ○ | |
| Fuel System | 4-hole type fuel injector assemblies are used. | ○ | - | - | - | ○ |
| A fuel returnless system is used. | - | - | ○ | ○ | ○ | |
| Quick connectors are used to connect the fuel tube and fuel pipes or pulsation damper. | - | - | - | ○ | - | |
| Ignition System | A Direct Ignition System is used. | ○ | - | - | ○ | ○ |
| Engine Control System | The flat type knock sensor is used. | ○ | - | - | - | - |