Home › Engine / Hybrid System › 3SZ-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003176 3SZ-VE ENGINE MECHANICAL _0016001 ENGINE UNIT DE DETAILS F

3SZ-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER BLOCK  


CONSTRUCTION


a.

Precision cast-iron is used for the cylinder block.


b.

The components listed below have been integrated in the cylinder block to reduce the number of the parts. (water pump swirl chamber, chamber for the oil pump rotor, generator bracket, air compressor bracket)

W103600C02
2.104,2.063 1.74,1.448 1.74,1.448 1.552,1.448 true 3.198,1.521 3.396,0.198 3.396,0.198 3.573,0.198 true 2.927,2.125 2.438,0.646 2.438,0.646 2.26,0.646 true 2.75,3.188 2.51,3.542 2.51,3.542 2.333,3.542 true 3.865,2.458 3.667,3.5 3.667,3.5 3.479,3.5 true 4.563,2.573 5.073,3.323 true 4.5,2.354 5.167,3.313 true 4.25,2.813 4.719,3.323 4.719,3.323 5.375,3.323 true 1.333,1.375 1.698,1.708 0.365,0.333 10 *1 3.646,0.125 4.052,0.458 0.406,0.333 10 *b 2.042,0.552 2.417,0.896 0.375,0.344 10 *a 2.135,3.469 2.479,3.771 0.344,0.302 10 *2 3.271,3.427 3.656,3.802 0.385,0.375 10 *c 5.438,3.25 5.781,3.552 0.344,0.302 10 *d
*1 Water Pump Assembly *2 Oil Pump Assembly
*a Generator Bracket *b Water Pump Swirl Chamber
*c Oil Pump Rotor Chamber *d Air Compressor Bracket



c.

Through the using of the offset crankshaft, the bore center is shifted 8 mm towards the exhaust, in relation to the crankshaft center. Thus, reduces the side force to the cylinder wall when the maximum pressure is applied and contributes to fuel economy.

W103601C03
4.604,1.948 4.135,1.49 4.135,1.49 3.948,1.49 true 5.792,2.198 6.26,1.698 6.26,1.698 6.448,1.698 true 3.771,1.406 4.135,1.781 0.365,0.375 10 *b 6.51,1.625 6.771,1.906 0.26,0.281 10 *b 0.781,0.896 1.115,1.26 0.333,0.365 10 *c 1.688,0.51 2.063,0.885 0.375,0.375 10 *a 1.76,3.073 2.063,3.406 0.302,0.333 10 *b 4.521,3 5,3.354 0.479,0.354 12 *A 5.677,3 6.094,3.354 0.417,0.354 12 *B
*A Offset Crankshaft *B Non-offset Crankshaft
*a Bore Centerline *b Crankshaft Centerline
*c 8 mm (0.31 in.) - -
V100136

Maximum Pressure - -