CONSTRUCTION
The pistons are made of aluminum alloy to allow them to be compact and lightweight.
Low-tension piston rings have been adopted to reduce the friction and improve the fuel economy.
These piston rings have been adopted this shape in order to improve the oil consumption performance.
A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring and oil ring, in order to improve its wear resistance.*
A chromium plating coating has been applied to the surface of the No. 2 compression ring, in order to improve its wear resistance.*
*: Models for Thailand
| *1 | Piston | *2 | No.1 Compression Ring |
| *3 | No.2 Compression Ring | *4 | Oil Ring |
|
PVD Coating |
|
Chromium Plating Coating |