CONSTRUCTION
Each cylinder has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased by means of the large total port areas.
The valves are directly opened and closed by 2 camshafts.
The VVT-i system is used to achieve low fuel consumption, high engine performance and reduce exhaust emissions.
The intake camshaft and exhaust camshaft are driven by a timing chain.
This engine uses the Variable Valve Timing-intelligent (VVT-i) system which controls the intake camshaft to provide optimal valve timing according to driving conditions. With this, lower fuel consumption, higher engine performance, and exhaust emission have been reduced.
| *1 | Camshaft Timing Sprocket Assembly
(VVT-i Controller) |
*2 | Chain Tensioner Plunger |
| *3 | Timing Chain Tension Arm | *4 | Camshaft (Intake Camshaft) |
| *5 | No.2 Camshaft (Exhaust Camshaft) | *6 | Exhaust Valve |
| *7 | Intake Valve | *8 | Chain Sub-assembly |