Home › Engine / Hybrid System › 3SZ-VE ENGINE MECHANICAL › ENGINE UNIT › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003176 3SZ-VE ENGINE MECHANICAL _0016001 ENGINE UNIT DE DETAILS F

3SZ-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  INTAKE AND EXHAUST VALVE AND VALVE LIFTER  


CONSTRUCTION


a.

Narrower valve stems are used to reduce the intake and exhaust resistance and to reduce weight.


b.

The same valve springs are used for both the intake and exhaust valves. They are variable pitch springs that offer good valve following performance.


c.

Stellite (CoCr6) (alloy) is applied to the intake valve face to be compatible with E20 fuel.*

*: Models for Thailand

HINT:

E20 fuel is gasoline blended with 20% ethanol.



d.

Valve lifters with shimless valve adjustment are used for weight reduction.

W103593C01
3.417,1 2.854,0.802 2.854,0.802 2.76,0.802 false 3.438,1.625 2.854,1.406 2.854,1.406 2.76,1.406 true 3.531,2.177 2.854,1.927 2.854,1.927 2.76,1.927 true 3.74,2.948 4.563,2.656 4.563,2.656 4.656,2.656 true 4.552,1.396 4.948,1.74 0.396,0.344 10 *a 2.542,0.729 3.104,1.125 0.563,0.396 10 *1 2.531,1.333 2.958,1.719 0.427,0.385 10 *2 2.521,1.854 3,2.302 0.479,0.448 10 *3 4.74,2.583 5.167,2.958 0.427,0.375 10 *4
*1 Cam *2 Valve Lifter
*3 Compression Spring *4 Valve
*a Lifter Thickness - -
V100145

Stellite (CoCr6) - -


NOTICE:

The adjustment of the valve clearance is accomplished by selecting and replacing the appropriate valve lifters. Adjusting valve lifters are available in 29 increments of 0.02 mm (0.0008 in.), from 5.12 mm (0.202 in.) to 5.68 mm (0.224 in.).